CLEANING AND DEEP CLEANING POLE CHAINSAW
IMPORTANT INFORMATION:
Never use water to clean electric tools.
Always unplug or remove battery before maintenance.
It is suggested to take pictures before disassembly any parts to be sure how to assembe it back.
---------------------------------------------------------------------------------------------------------------------------------------------------
TOOLS NEEDED:
- - Cloth
- Hex wrench 13mm
- Torx screwdriver T25
- Seeger plies/ Circlip plies
- Toothbrush
-
BASIC CLEANING (AFTER EVERY USE)
1) Remove the battery
2) Using the hex wrench, remove the bolt
2) Remove the cover
3) Remove the blade and chain
4) Clean everything well with compressed air, toothbrush and cloth
Make sure to remove all the dirt and oil on the surface
5) With compressed air, clean the chain slot on the blade
6) Mount everything back following the steps backwards.
Make sure the chain is on the right way as shown on the picture below.
5) Adjust the chain tension using a flat screwdriver on the tensor
6)Always cover the blade and leave the battery unplugged
DEEP CLEANING
Dependind on usage:
-Daily use – Clean once a week
- Weekly use – Clean once every two/three weeks
-Monthly use – Clean after every use
7) After step 3, remove all the screws and save them in a container to avoid losing.
8) Using the seeger plies, remove the circlip by opening it while pushing upwards
9) Remove the chain bolt
10) Turn the chainsaw around, remove all the screws, carefully remove the plastic cover and clean it well
11) Using the seeger plies, remove the circlip
12) Remove the plastic fan
13) Remove the screw and carefully remove the oil deposit
14) Clean everything well with compressed air and a toothbrush
15) Follow all tha steps backwards to reassemble the chainsaw
16) Always cover the blade and leave battery unplugged when stored